Posted on April 28 2014
We do a lot of spey casting at our lodges, and in turn a lot of spey casting instruction. When working with anglers on their casting, we tend to see many of the same casting faults while making the transition from single hand fly casting to spey casting. Here are the 3 most common spey casting faults we see on a daily basis, and how to correct them of course!
Don’t Rush It!
In other words, slow down, slow down, slow down. Whether single hand casting or spey casting, many anglers rush the cast creating many casting problems. Remember, a perfect cast is that that unrolls with just enough energy to reach the target, no more, and no less. Like all fly casting, more ‘power’ is often counter productive, resulting in a less efficient cast. Slowing down allows the rod to load deeper which is where the true power comes from.
However, creating the d-loop and coming through with the forward cast are not the only parts of the cast where slowing down is beneficial. According to our lodge manager at B.C. West, Kara Knight, it is important when things aren’t going right with your cast to slow down every part of your cast as well. Slow down your setup, the lift, and the sweep too. If your cast seems to be going downhill, try slowing everything down first, and you may be surprised at the improvement!
Aim For the Tree Tops
A very common problem with those making the switch from their single hand rod is not stopping the rod high enough on the forward cast. Most of us understand when traditional fly casting that a straight line path of the rod tip results in a nice tight loop. However, when using a much longer spey rod, some anglers often don’t realize how high one must stop the rod to achieve the same ‘straight line path of the rod tip.’ A high stop of the rod on the forward cast is also necessary to achieve the trajectory required for your loop to unroll above the surface of the water. Stopping too low directs the loop towards the surface of the water, robbing you of your maximum distance.
When making the forward cast, tell yourself to ‘aim for the tree tops.’ This will help remind you to stop the rod high and correct a number of casting issues. Remembering to aim high will also help to use more bottom hand throughout the stroke as opposed to too much top hand, which is yet another common casting fault! Aim for the tree tops, and you’re bound to eliminate several casting faults.
Anchor Placement
Proper anchor placement is absolutely key to all good spey casts. One can do everything right throughout the cast, but if the anchor is not positioned correctly, the cast will likely crash and burn. We could write for days on anchor placement, but why not let our buddy Tom Larimer explain anchor placement in video form. Need more? Here’s a video on advanced anchor placement as well!